Wyoming GoldSculpting, Casting, Moldmaking & More!

Casting Supplies Information and What Casting Supplies Will You Need

Some of the casting supplies are described below.

Cast cutters and blades: There are two varieties of cast cutter blade for plaster casts – 2 inches and 2.5 inches. This comprises of one blade and in most of the cutters, stainless steel blades fit in. This has a maintenance free operation and is comfortable to use. There is a high torque motor and an ON / OFF switch. The Cast cutter blade for synthetic casts is also available in two sizes – 2 inches and 2.5 inches. This has the same features as mentioned above. The Hercules Plaster Shears 7.5 inches is a Hercules heavy duty bandage and plaster shears 7.5 inches (19.1 cm) and has a serrated blade. The Cast cutter heavy duty with metal housing consists of one 2 inches fiberglass blade. In most of the cutters, a stainless steel blade can be fitted. The length is 12.5 inches and weight is 3 lbs 13 oz. This is specially lubricated for greater service and more comfort. The heavy duty can be used in both clinical use and fabrication setting.

Cast padding: The specialist casting padding 3 inches X 4 yards is made up of micro pleated cotton fabric that stretches more than 50 percent. There is no need to tear and tuck for a smooth and comfortable fit. This is also available in sizes of 4 inches X 4 yards as well as 2 inches X 4 yards. The Sof Rol padding 3 inches X 4 yards is made of 100 percent surgical grade rayon. This is also available in sizes of 2 inches and 4 inches X 4 yards.

Cast splinting materials: The orthoplast II splint material plain is available in size of 18 inches X 24 inches X 1/8 inch. The setting time is 3 to 4 minutes. The finished splints can be butt bonded, hinged, bonded, strapped and riveted. There is a wax coated surface. This is self adhering when heated. This is majorly designed for upper extremities. It is perfect for hand splints. It moulds as per the contours of the body without any wrinkling. The orthoplast splinting material plain is available in sizes of 18 inches X 24 inches X 1/8 inch. This is made of a low heat thermo plastic material and is highly comfortable. After this material is heated, it can be molded or cut to any shape and adheres to itself. This material can be butt bonded, hinged, bonded, strapped and riveted. This can also be used in cylindrical casting procedures.

Heat gun: This is of two types – heat gun and master heat gun 220 volt.

Splinting pans: The forma splint 14 inches X 10 inches is an extremely compact and lightweight design. So, it is perfect for small splinting needs or for varying spots. This has a stainless steel working tank of dimensions 13 inches X 9.5 inches X 1.25 inches. This has a lexan cover. Water is maintained at controlled temperatures by a variable temperature thermostat between 150 degrees Fahrenheit and 190 degrees Fahrenheit. There is a high heat safety switch and grounded hospital grade plug. The empty weight of this device is 5.5 lbs. It heats to the required temperature in only 15 minutes.

About the Author

Go to Metal Casting Zone to get your free ebook on Metal Casting at http://www.metalcastingzone.com. Metal Casting Zone also has a Metal Casting Forum, Metal Casting Information, and a Metal Casting Blog that can all be found at http://www.metalcastingzone.com. Go to http://www.metalcastingzone.com to see the latest information on Metal Casting that has been added.

Body Molding & Belly Casting : Preparing Plaster for Belly Casting

Dinosaur Bones Sand Mold Set (10 Pcs. Set) $12.99 Build your own dinosaur in the sand! This is really a unique idea for a dinosaur toy. It contains 10 plastic molds which are perfect for any sandbox or sand and water table. When finished, it looks just like the dinosaur was recently covered by blowing and drifting sand. The 10 pcs. are together inside of one net bag….

12×12 Vacuum Form Machine – Plastic Former for Model, Mold, and Prototype Forming $129.95 Our 12″x12″ Table Top Vacuum Former is perfect for small businesses and hobbyists who want to create parts in plastic up to 1/8″ thick. Produce intricate shapes with results that rival expensive commercial machines in their incredible accuracy and detail: prototypes, custom packaging, RC car bodies, model rocket nose cones, molds for plaster or concrete, chocolate and candy, candles, and soap maki…

Activa Magic Color Plaster Casting Molds, 36 Designs $7.60 For Use with Magic Color Plaster, Art Plaster, PermaStone, Activ-Clay, Wax, Soap and Resin. Contains thirty-six reusable molds in a variety of shapes and sizes: animals, vehicles, hearts, stars, fish, birds, bugs and a crown. Plaster is not included. Recommended for children ages 5 and up….

Krazy Kars Marble Racer 2 Pack Cats Eye and Confetti $13.99 Light Up Marble Racers combine the racing excitement of mini-toy sports cars and the classic amusement of marbles to create a fun new toy for boys and girls 3 years of age and older. Kids customize their Marble Racers with themed, easy to use, crack & peel racing decals, race their creations on standard tracks, and then watch as the flashing LED marble rolls to keep pace with their speeding car.Pr…

Plaster Cloth, 10sf $7.84 A simple, convenient and lightweight way to create a durable terrain shell. Just wad newspaper and stack to form desired terrain areas. Hold the wads in place with masking tape. Dip Plaster Cloth in water and smooth over terrain areas. The Plaster Cloth will dry to a hard shell….